3M Radial Disc 3/4″ 120 grit (White) – 3 Pack
3M Radial Disc 3/4″ 120 grit (White) – 3 Pack
Check out our FREE: Polishing with Power Tools Class with Joe Silvera to see how to use these Radials.
Also available as Radial Kit with 7 Grits and 4 Mandrels.
- Abrasive: 120 grit
- Wheel diameter: 3/4″
- Hole size: 1/16″
- Used with our Mini Screw Mandrel.
- Nearly completely dust-free when used to polish.
- Flexible bristles provide a uniform finish.
- Removes firescale.
- Removes oxides without heavy compounds.
- Can polish in deep recesses.
Order of Radials from most coarse to most fine:
Yellow (80 grit), White (120 grit), Red (220 grit), Blue (400 grit), Pink (Pumice), Peach (6 micron), Green (1 micron)
“I love using the radials to remove ink or oxidation after adding it to my stamped impressions. Sometimes I use the white radials because I wanted a bit of texture as well.”
These Radials are used with our Screw Mandrel. It is necessary to stack them 3-6 at a time onto the Mandrel so they create a nice wide brush. You will need to stack them in the correct direction. When loading your radials on your mandrel, you will want the points of the radials to be going to the right as you are looking at them. If you look at the back of the radial, you will see the 3M logo. This logo needs to be pointing down toward the shaft of the mandrel. If you stack your radials the wrong way, they will bend back and begin to break, destroying the radial bristles.
